Western Specialty Contractors KC Sheet Metal Branch
KC Sheet Metal is a full service sheet metal contractor with in-house sheet metal fabrication facilities. We provide services to meet every commercial roofing and sheet metal need. We are a company with a proven track record and an excellent reputation. Over the years, management has received many technical achievement awards from various roofing material manufacturers.
Our technical ability, experience, trained personnel, and financial strength enables us to perform the most complex projects. We offer value engineering and design-build options to provide the most competitive, cost-effective work possible. No job is too large or too small.
Recognizing that no single roofing system is best for all buildings, we evaluate your requirements and recommend, engineer and implement the roofing and sheet metal system that best meets your needs.
We have licensed applicators of virtually every major roofing material manufacturer.
Building Cleaning Concrete Restoration Epoxy & Chemical Grout Injection Expansion Joint Systems Exterior Wall Coatings Masonry Restoration Parking Deck Restoration Plaza Deck Restoration Waterproofing Roofing
Don’t see the service you’re looking for? With over 30 branches across the country and the expertise that comes with 100 years in the business, Western Specialty Contractors can accommodate just about any restoration and preservation project.
To learn more about the projects out of this location click on the following links:
Western Specialty Contractors 2820 Roe Lane • Kansas City, KS 66103 • (913) 677-4679
“In 2011 Western’s Sheet Metal Branch completed an entire roof replacement project at our Junction City, KS, Service Center. The total project was completed over three phases and consisted of approximately 1.3 million square feet of roofing and subsequent sheet metal work.
Western’s Sheet Metal Branch was great to work with throughout all phases of the project including planning, construction, and project completion. Western’s Sheet Metal Branch was responsive to our facilities’ needs, completed each phase within the timeline given for the project, and provided quality work. Their on-site Foreman managed their crews effectively and the crews worked efficiently and safely.”
Kyle Lang Loss Prevention & Safety | Foot Locker | Junction City | KS Service Center
“I wanted to take this opportunity to thank you and your staff at Western’s Sheet Metal Branch for all the time and hard work you put into the US Bank Business Center in Olathe, KS. In the past 12 months, it has been a pleasure to work with such a respectable subcontractor.
I would like to bring to your attention some individuals that went well beyond their normal responsibilities on our job site which are as follows: When we first started with the roofing membrane we had Chris Newell as the foreman. Even though there were many scorching days Chris and his crew always kept a positive attitude and put in many exhausting hours. After the membrane was down we had a sheet metal crew of Tony Vaughn and David Lemon, after hitting many bumps with the architect and shop drawings these guys came out and performed well and also kept a positive attitude. Western’s Sheet Metal Branch should be proud to employ such great field staff.
I also wanted to notify you that after the punch list walk-through with the architect and owner, Western’s Sheet Metal Branch came out of the project with a ZERO PUNCH LIST. This is something that we at Ryan Companies US, Inc. strive for on every project and Western’s Sheet Metal Branch has achieved our goal.
Please pass this message on to the individuals mentioned above as a sincere Thank You from all of Ryan Companies’ US Bank Business Center Staff. We look forward to any future endeavors that we may have with Western’s Sheet Metal Branch.”
Jason Bekken Property Manager | Ryan Companies, Inc.
“In the last five years, Western’s Sheet Metal Branch has reroofed two buildings of ours with a Firestone TPO metal retrofit roof system over an existing standing seam metal roof. In July of 2008, a 100,000 square foot building at 825 Armourdale was reroofed and in 2011 a 100,000 square foot building at 1200 South 5th Street was reroofed. We were very satisfied with the installation by Western’s Sheet Metal Branch and have not had any issues with the roofs.
Western’s Sheet Metal Branch has been performing work for us since 1987 and I would recommend them for any roofing or sheet metal work you have.”
William J. Willhite, II President | Prime Investments, Inc.
“I hope this e-mail finds you in good spirits and ready to enjoy the upcoming holidays! You and the guys at Western’s Sheet Metal Branch have been great to work with this past year. Thanks for all your help and for getting us dry when we needed it!
The guys at Garmin and I are looking forward to whatever gets thrown at us next year knowing we can count on you and your staff for assistance and great service. Good luck with whatever gets thrown at you next year and have a Happy Holiday Season!!! Thanks again!”
Chris WolfeGarmin International
“Please accept this as a letter of recommendation for the outstanding job you and your team did for us at our property in Riverside, Missouri. The metal retrofit went very smoothly and your team was not only professional but they went out of their way to provide both me and our tenants with excellent customer service.
We certainly look forward to continuing our association with Western’s Sheet Metal Branch.
If further information is required, please feel free to contact me directly at 816.412.5859.”
Maureen KennedyAssociate Director | Property Management | Block Real Estate Services
“Due to a series of impressive projects completed in 2016, and for the firm’s commitment to superior commercial roofing, Firestone Building Products has presented Western’s Sheet Metal Branch with the 2017 Master Contractor Award. The annual Master Contractor Program honors top Firestone Building Products Red ShieldTM Licensed Roofing Contractors for excellence in roofing system installation, quality of work, and customer service.
This is the 12th time Western’s Sheet Metal Branch has earned the Firestone Building Products Master Contractor Award. The firm achieved this designation by meeting requirements for total square feet installed; outstanding assessment ratings on materials covered by the Red ShieldTM Warranty; and the number of completed Red Shield warranted jobs. Master Contractors were also required to earn a Preferred Quality Incidence Rating (QIR) that did not exceed three times the average QIR for Red Shield Contractors.
On behalf of Firestone Building Products, I congratulate Western’s Sheet Metal Branch on a successful 2016. The firm demonstrates a commitment to excellence and has upheld our high commercial roofing standards. We are pleased to recognize Western’s Sheet Metal Branch as a Master Contractor and look forward to continuing our partnership to provide superior building performance solutions in 2017 and beyond.”
Timothy C. DunnPresident | Firestone Building Products